Please fasten all screws by hand and not an electric screwdriver or drill, as over tightening is not recommended.
Instructions to install the Sliding Door Double Cylinder Lock.If installing this lever set into a new door, you will need the following tools: 3mm pilot hole, 9mm drill bit, corded or cordless drill, hammer, wood chisel, Phillips head screwdriver, tape
and pencil.If you are replacing an existing lock, remove your existing lock, clean down surfaces and follow the Installation process.
Step 1: Preparation Correctly place template and fold on line A. Tape it to your sliding door face, at the desired height from the floor level, ensuring that a position is selected either above or below the existing screen door handle so that the handles don't interfere with each other. Drill marked holes using a 3mm pilot hole followed by 9mm drill bit and continue with the installation. Inside Cylinder Step 3: Installing Keeper and Striker Unscrew the Jacking Screw and loosen the Fixing Screws. Separate the Keeper from Striker. Line up the Striker with the Lock Chassis on an adjacent door frame. Fasten the Striker to the door frame with screws. Jacking Screw Reassemble the Keeper and Striker. Fixing Screws can be used to adjust Striker up and down to better fit the Beak locking mechanism. Cylinder Locator Fixing Screw Tail Piece Black Markings WARRANTY CONDITIONSAny claim under this warranty must be made within 3 years of the date of purchase of the product. To make a claim under the warranty, take the product (with proof of purchase) to any Bunnings store (see www.bunnings.com.au for store locations). Romak
Hardware Distributors Pty Ltd bears reasonable, direct, expenses of claiming under the warranty. You may submit details and proof to our store for consideration. The warranty covers manufacturer defects in materials, workmanship and finish under normal
use. This warranty is provided in addition to other rights and remedies you may have under law: our goods come with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and
compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The warranty excludes damage resulting
from product misuse or product neglect. The warranty covers domestic use only and does not apply to commercial applications. This warranty is given by Romak Hardware Distributors Pty Ltd, ABN 15489950457, 177-181 Atlantic Drive, Keysborough Vic 3173,
(03) 9795-6789, e-mail: sales@romak.com.au Suits models 697460, 697470, 697480. Outside Cylinder 00566-001_SLIDING DOOR LCK IKONIC DBL CYL 697460_697470_697480 - Instruction LEAFLET-V1.indd 1 Outer Pull Lock ChassisStep 2: Installation of Handle - Please note the Black Markings on Cylinders and Tail Pieces. In order for this lock to work